Well after lots of distractions eBay, holidays, etc....Truck Shop rises and it isn't GREEN!!!
Well off to more distractions before I finish some battens and swash on some more board wash.
Sunday, December 28, 2003
Truck Shop Too - Rises
Posted by Wallace at 12/28/2003 11:06:00 PM 0 comments
Sunday, December 21, 2003
Sledge Hammer
Holiday Greetings all!
Some say it was a bad storm other little people seem to think it the wrath of an angry god and some even report seeing a large fist desending from the sky.
Before you morn the loss of my Truck Shop, notice the framing beside it is no longer GREEN!! Besides by the time I'm done I will have framing and basic grey/brown weathering down. It didn't take but a couple hours to reframe. I had Kappler on hand. "
Posted by Wallace at 12/21/2003 01:11:00 AM 0 comments
Friday, December 19, 2003
No Not Too Green
I have started on the nail holes but everything I do seems to close them back up. What size pin do you use in your vise and at what 'point' in the process. Should I wait until after the walls are stained and mostly weathered? Or is there a reason for now?
You know sitting 10' away from my green monster it doesn't look so bad. Maybe, all my close-up work and pictures over-emphasize the green.
Posted by Wallace at 12/19/2003 01:33:00 AM 0 comments
Thursday, December 18, 2003
Too Green?
Maybe my Truck Shop isn't too green. Everytime I add something it looks better to me. Maybe just the eyesite going. Didn't get to the office today. Will try Friday.
My name is Wally and I'm addicted to buying models bought Baxter's, Schramm's and a CC Crow roundhouse on ebay last night. It has been 24 hours since my last bid. I need a sponsor to call when I have the urge.
Posted by Wallace at 12/18/2003 11:55:00 PM 0 comments
Wednesday, December 17, 2003
Green Monster
Well after two days without cable or internet I'm back. Somehow I didn't get a whole lot done.
I did talk to Brett and learned the logic of battens, every building in RRC has a different texture. I still think battens on an open air structure would be unlikely but I did it anyway.
My other experiment turned out less well. I want some green mildew weathering instead I got a green building. Any suggestions? No, St Nick a sledgehammer is out of the question it might break the new glass on my work table.
Off to do XMAS---maybe soon I can work on the office...I started it yesterday while I wait on a few windows I need from SW."
Posted by Wallace at 12/17/2003 06:42:00 PM 0 comments
Sunday, December 14, 2003
Flipping
By the way...Yes, I am thinking about flipping the ends and putting the shed on the end near the large doors. Not sure yet, just thinking
Posted by Wallace at 12/14/2003 11:06:00 PM 0 comments
Batten or Not
Busy day at church. Didn't get much done on Truck Shop. I did do my first windows and decided to frame the big doors too.
I tried to get y'all to share an opinion about to batten or not and hardly a reply. Well, what do you think? Not size of battens but battens or not."
Posted by Wallace at 12/14/2003 11:04:00 PM 0 comments
Battens
I've just about decided to go batten-less on my Truck Shop. There are lots of 'out' buildings around where I grew-up and battens seem out of place on a shop that was thrown together for function. A office or house battens--Yes because it needed to be air tight. This truck shop will never be air tight. Who cares if the truck gets cold at night. I just think that rustic is the way. I read the thread about smaller but I think none. Any reason why not to go batten-less like the building next door is already batten-less?
I'm also thinking about a sheet metal roof. I saw the thread about the tin roof. Any suggestions for who sells or how to make corrogated sheet metal roofing?
Warning - For my first model ever I'm getting pretty cocky! Don't worry I'll break something and things will be normal. Like the other day when the stained lazer-cut windows that I left by the stove caught fire--only a small one-- I lost the tarpaper shed windows and a sash.
Posted by Wallace at 12/14/2003 12:45:00 AM 0 comments
Saturday, December 13, 2003
Walls
"Test fitting the walls!
The jig and rubber band are all that holds the windows in and the walls upright.
I'm trying to decide about battens now. They seem out of proportion and a number of old buildings around here especially the out building type are just boards"
Posted by Wallace at 12/13/2003 09:19:00 PM 0 comments
Friday, December 12, 2003
Framing II
I'm back 'on track' the Truck Shop is all framed and much better than the first time. Guess the glue disaster was a good thing. Only took two sessions of about 4 total hours to rebuild. It is actually my first. This is my first model unless you count those things as a kid where you ended up with Testor's Cement as the texture all over the outside of a plane or boat or whatever. I hated them. Mine never stayed together if they didn't get broken in the first place.
Well must go off to a party"
Posted by Wallace at 12/12/2003 08:19:00 PM 0 comments
Railroad Line Forums
Well guys...
I have wax paper and double stick tape and all. Not to mention two ends framed. They are going together much easier and more exactly this time. Maybe the first time was intended as practice. The Tractor Shop will be more solid now.
Off to finish the front and back framing.
Somebody take my credit card. I bought a compressor at Harbor tonight to replace the one I just bought from Hobby Town--Blue one from Testors. The new one is 3hp with a 8g tank. I tried out the airbrush and good pressure makes all the difference. I could probably drive nails with this too. Well if I return old blue that is an even trade.
Posted by Wallace at 12/12/2003 12:42:00 AM 0 comments
Thursday, December 11, 2003
Railroad Line Forums
Here it is my first framing that worked!
Thanks guys all the post but especially the last few have helped a great deal!
St. Nick I have revised my Christmas wish list. I'll buy one of every SW if you will leave them built under my tree. I have been a good boy. I can work on Minden Flour, so don't worry about my not having anything to do. "
Posted by Wallace at 12/11/2003 03:40:00 PM 0 comments
Saturday, December 06, 2003
Hooked
Y'all are making me dangerous before I started hanging here I would have driven right past. I stopped in a hole in the wall train store Cook's Trains in Shreveport, LA a couple of times this week for spray paint and such. Each time I eyed a dusty old box in the corner -- C C Crow's Minden Flour Milling Co. Well today I just plopped down the old credit card and bought it for what it listed for on his old site before BIS less than the $250. listed today if he has it.
It looks like fun, very different than SW.
My name is Wally and I'm a kit builder. I have been 5 hours without buying a kit. I like the smell of dusty old boxes even the mothball smell of SW. I need help."
Posted by Wallace at 12/06/2003 01:43:00 AM 0 comments
Thursday, December 04, 2003
Rock Walls
Ok Guys...
I have been doing this by the book and suggestions gathered here.
but...
I finally got the base coat on the rock walls tonight...
Floquil spray concrete.
I don't like it as a base coat too silvery doesn't look like the beginnings of rock to me.
The outside looks better than the inside because of the rock imprint. The inside doesn't even look like concrete walls to me and you don't really weather the inside. I know for the most part not seen but I know it is there.
This is the second thing I'm too picky about. I was disappointed with my staining of bag 5 with that different method. They are much darker than 1-4 which I liked.
I was thinking about using some thinner to clean the concrete off the walls and starting over using some of the suggestions from Foss. Maybe with an earth base coat thinned and brushed on. What do you think?"
Posted by Wallace at 12/04/2003 11:21:00 PM 0 comments
Sunday, November 30, 2003
Spray Paint
Hi all...I just couldn't stay away any longer or eat another bite.
My family has decided I have totally lost it. On our Thanksgiving trip I planned stops in cities with big hobby shops a lot of HobbyTowns looking for Floquil. Many stores arn't carrying it anymore. I finally hit the jackpot in Jackson, MS and stocked up.
However, I never found the Floquil spray paints listed in the RRC instructions. Is there any reason I can't just mix up a batch of regular Floquil thinned 50/50 for my airbrush? I think I have all the colors in the 1oz bottles?"
Posted by Wallace at 11/30/2003 06:13:00 PM 0 comments
Wednesday, November 19, 2003
Sign
Ok I have the blabs tonight...
I thought you might be interested in what I decided to do about the coke sign. If you don't remember the Coke sign is on a warehouse directly across the street from the Clinchfield station. With your help I found a copy of the sign in new condition on the net. I am going to use Photoshop -- The technique desribed here http://www.techtv.com/screensavers/answerstips/story/0,24330,3423189,00.html
to fade away the weaker colors just substituting a brick wall for the wood one. Then I am going turn off the layer with the wall and send the file to be made into a decal. I am looking for a custom decal place that the decal can be burnished into the brick of the model. Of the ones mentioned before who would do this the best??? Finally, I am going to weather the building with the sign in place with the normal washes and chalks. What do you think? I'm hoping for a faded worn out sign much like the one in the picture I posted. I discovered that the black tar streak was where another building roof since torn down covered the coke sign. I probably will leave the tar out.
Somebody stop me rambling."
Posted by Wallace at 11/19/2003 01:45:00 AM 0 comments
Station at Johnson City
The old Clinchfield station in Johnson City, TN continues to draw me in. The station is in bad shape but they are trying to save it. The roof is almost gone. The Clinchfield and ET&WNC (Tweetsie) met at that station. NS & CSX still travel the old Clinchfield line in front of it today. The old state foundry was blocks up the street. Kingsport intermodal yard is not far away (15 miles by rail) and the Jonesbourgh the oldest town in TN with many old structures is on the line. So in my fantasy layout the end of steam meets deisel intermodal around Johnson City. Since the ET&WNC is no longer around except for some great old tunnels and decaying bridges I decided the part of ET&WNC I would model would be steam, coal, lumber, foundry, etc. I have pictures of all the old structures. There is a church camp in Doe Creek Gorge that is a great place to visit where you can walk or ride through history. On the Clinchfield side I am going to do CSX modern coal and NS intermodal. The only place they meet is Johnson City and all within a 20 mile stretch of track. I now need to decide if I am going to do the ET&WNC in narrow gauge being faithful and limit my options or HO. The track between Johnson City and Elizabethton was dual so maybe I do dual. I plan another picture trip next week when I get back for Thanksgiving to Kingsport to capture more of the modern stuff intermodal, chemical Eastman, another old foundry and station. I wish I knew where to get more detailed rail maps than the route map one with some indication of siding and yards.
By the way I am thinking about spring training through TN, NC, VA, & WV. I'd start at Great Smokie and end up at Cass with Doe and the Mine museum among others in between. Flea bag hotels"
Posted by Wallace at 11/19/2003 01:35:00 AM 0 comments
Monday, November 17, 2003
Supplies
I ordered a set of Grumbacher Soft Pastels Landscape last night they were hard to find. Michael's doesn't carry them anymore and on many online sites they were out of stock.
I finally found them -- 1 LandscapeClose Out:Grumbacher Soft Pastel SetsGR00/L $22.50 at Reuels.com. Anybody know if they have been totally discontinued? I was looking for them based on Brett's Color list.
Hey by the time I'm done stocking up the supplies and tools will have cost as much as my kit order from SW. I am framing and laying out my first walls.
Well got to go wait on packages from Reuels, Woodland Scenic, Kapplers, Serria, Scenic Express and Micro-Mark. And Wednesday the new HobbyTownUSA opens here"
Posted by Wallace at 11/17/2003 09:54:00 PM 0 comments
Sunday, November 16, 2003
Started - Glue?
RRC is coming well the strips are stained and the casts are cleaned. Drilling the cast do you drill both resin and metal? With what size bit and by hand? Would a drop of CA hold the tooth pick instead of drilling. By the way what is the difference in CA which I understood and ACC?
Posted by Wallace at 11/16/2003 04:32:00 PM 0 comments
Saturday, November 15, 2003
This is a classic old sign painted on the side of a warehouse in Johnson City, TN. I might make the black streak a little less prototypical It is directly opposite the old combination passenger and freight station which is falling down. A speculator has purchased it and a number of other old buildings hopefully the station can be saved. Since Johnson City is where Clinchfield and ET&WNC (Tweetsie) met a lot of old pictures show the station. I am thinking about modeling it one day and am taking lots of digital pictures.
Posted by Wallace at 11/15/2003 09:32:00 PM 0 comments
Thursday, November 13, 2003
Making Stain
Nobody is as far behind as I am. I just got started last night. I am staining strips as we speak. I used Brett's formula in leftover plastic bags. The Ham and Cheese was a little stale.
I expect to be talking to myself before I'm done. So what is new! :)
Posted by Wallace at 11/13/2003 11:50:00 AM 0 comments
Tuesday, November 11, 2003
Railroad Camp Arrives
My RRC arrived tonight and I'm eagerly getting started. The plan is to do as much as I can before the first of the year. I hope to not be too far behind on starting the Mill with you then. So I'll shelve RRC or use it as my relief project. Thanks to all of you who have gone before. I finished reading Foss thread this afternoon and will keep this one close as I work on RRC.
'This stain won't stay on my hands forever will it?' - Nah just a month or two.
Posted by Wallace at 11/11/2003 11:57:00 PM 0 comments
Layout - Waiting on UPS
I'm still waiting on UPS. Y'all have me so excited.
My layout focuses on the corner of TN/NC/VA and with a little imagination KY. I like Clinchfield and ET&WNC (Tweetsie) around Johnson City, TN. I think I have decided on Fall in the late 40s. That would make the RRC, Sawmill, and coal perfect. Foss might have to be on a lake. Anybody know of an avaliable coal operation of the quality of SW? The area had lumber, coal, narrow guage, and eventually chemical.
My only struggle is I love to go up to Jonesbourgh, TN and take pictures of the town (oldest in TN) with the CSX intermodals rambling through or over toward Gate City and capture the NS coal train headed from VA and KY. I'd miss that if I do strictly 40s but I love the structures, images, and steam of the period of the RCC? Since time kind of left its mark on this area I have considered sticking with the structures of 40s in some areas and doing modern in other parts. It is amazing to me how many of the buildings in this area are still of that period. I have to take the digital out and capture the station and warehouse with a sign for 'Arthur's Loan - Pawn Broker fading on the outside.
Hope I didn't ramble too much, reading about your progress has already helped my planning.
Well back to the inventory of my tools in the shed. The UPS woman brought a computer today and I was bummed.
Posted by Wallace at 11/11/2003 12:53:00 AM 0 comments
Saturday, November 08, 2003
Fine Scale Discovery
I'm just jumping in. I havn't built anything in a numbers of years and then nothing as complex as the craftsman kits. Now, in my lurking, you have inspired me and I am going to build SierraWest RailRoad Camp.
While I am reassembling tools and buying supplies I want to read a Finescale construction book. I have Frary's stuff (Realistic, 303 etc) but to me it is to modeling what landscaping and painting is to constuction. I'm looking for the carpentry manual to remind me of the basics and guide me in the way of more advanced stuff with an eye eventually to scratch building not plastic kits.
Off to the tool shed to find my rusting tools. By the way nice job on the shed guys it doesn't even leak. Bet you made sure of that, didn't cut anybody any slack. The shed is by that empty field of dreams where one day the sawmill will be. Right? :)
I really enjoyed the discussion of the building of the camp! Mine should arrive Monday."
Posted by Wallace at 11/08/2003 11:17:00 PM 0 comments